[1] KIM Y, KIM H W, PARK H J. Effect of pea protein isolate incorporation on 3D printing performance and tailing effect of banana paste[J]. LWT, 2021, 150:111916.
[2] ZHENG L Y, REN A Q, LIU R, et al. Effect of sodium chloride solution on quality of 3D-printed samples molded using wheat starch gel[J]. Food Hydrocolloids, 2022, 123:107197.
[3] MANTIHAL S, KOBUN R, LEE B B. 3D food printing of as the new way of preparing food: A review[J]. International Journal of Gastronomy and Food Science, 2020, 22:100260.
[4] YOU S Q, HUANG Q R, LU X X. Development of fat-reduced 3D printed chocolate by substituting cocoa butter with water-in-oil emulsions[J]. Food Hydrocolloids, 2023, 135:108114.
[5] BAIANO A. 3D printed foods: A comprehensive review on technologies, nutritional value, safety, consumer attitude, regulatory framework, and economic and sustainability issues[J]. Food Reviews International, 2022, 38(5):986-1016.
[6] MASBERNAT L, BERLAND S, LEVERRIER C, et al. Structuring wheat dough using a thermomechanical process, from liquid food to 3D-printable food material[J]. Journal of Food Engineering, 2021, 310:110696.
[7] DONG X P, PAN Y X, ZHAO W Y, et al. Impact of microbial transglutaminase on 3D printing quality of Scomberomorus niphonius surimi[J]. LWT, 2020, 124:109123.
[8] HE C, ZHANG M, DEVAHASTIN S. Microwave-induced deformation behaviors of 4D printed starch-based food products as affected by edible salt and butter content[J]. Innovative Food Science & Emerging Technologies, 2021, 70:102699.
[9] ARRIETA-ESCOBAR J A, DERRIEN D, OUVRARD S, et al. 3D printing: An emerging opportunity for soil science[J]. Geoderma, 2020, 378:114588.
[10] KERMAVNAR T, SHANNON A, O’SULLIVAN L W. The application of additive manufacturing/3D printing in ergonomic aspects of product design: A systematic review[J]. Applied Ergonomics, 2021, 97:103528.[LinkOut]
[11] BA P, LOKESH N, BURADI A, et al. A comprehensive review of emerging additive manufacturing (3D printing technology): Methods, materials, applications, challenges, trends and future potential[J]. Materials Today: Proceedings, 2022, 52:1309-1313.
[12] KERMAVNAR T, SHANNON A, O’SULLIVAN L W. The application of additive manufacturing/3D printing in ergonomic aspects of product design: A systematic review[J]. Applied Ergonomics, 2021, 97:103528.
[13] HE C, ZHANG M, DEVAHASTIN S. Microwave-induced deformation behaviors of 4D printed starch-based food products as affected by edible salt and butter content[J]. Innovative Food Science & Emerging Technologies, 2021, 70: 102699.
[14] RANDO P, RAMAIOLI M. Food 3D printing: Effect of heat transfer on print stability of chocolate[J]. Journal of Food Engineering, 2021, 294:110415.
[15] BITENCOURT B S, GUEDES J S, SALIBA A S M C, et al. Mineral bioaccessibility in 3D printed gels based on milk/starch/κ-carrageenan for dysphagic people[J]. Food Research International, 2023, 170:113010.
[16] NIU D L, ZHANG M, TANG T T, et al. Investigation of 3D printing of children starch gummies with precise and special shape based on change of model parameters[J]. Journal of Food Engineering, 2023, 356:111568.
[17] AZAM R S M, ZHANG M, BHANDARI B, et al. Effect of different gums on features of 3D printed object based on vitamin-D enriched orange concentrate[J]. Food Biophysics, 2018, 13(3):250-262.
[18] ZHU Y L, LIU Z B, ZHANG X F, et al. Microwave-triggered 4D automatic color change in 3D-printed food materials incorporating natural pigments[J]. Foods, 2023, 12(10):2055.
[19] YANG F, ZHANG M, LIU Y P. Effect of post-treatment microwave vacuum drying on the quality of 3D-printed mango juice gel[J]. Drying Technology, 2019, 37(14):1757-1765.
[20] LIU Z B, BHANDARI B, PRAKASH S, et al. Linking rheology and printability of a multicomponent gel system of carrageenan-xanthan-starch in extrusion based additive manufacturing[J]. Food Hydrocolloids, 2019, 87:413-424.
[21] LIU Z B, ZHANG M, BHANDARI B, et al. Impact of rheological properties of mashed potatoes on 3D printing[J]. Journal of Food Engineering, 2018, 220:76-82.
[22] FANG F. Shear-induced synergistic effects of konjac glucomannan and waxy potato starch on viscosity and gel strength[J]. Food Hydrocolloids, 2021, 114:106540.
[23] LI X X, YUE X R, HUANG Q L, et al. Effects of wet-media milling on multi-scale structures and in vitro digestion of tapioca starch and the structure-digestion relationship[J]. Carbohydrate Polymers, 2022, 284:119176.
[24] LU X X, MA R R, ZHAN J L, et al. The role of protein and its hydrolysates in regulating the digestive properties of starch: A review[J]. Trends in Food Science & Technology, 2022, 125:54-65.
[25] JI S Y, XU T, LI Y, et al. Effect of starch molecular structure on precision and texture properties of 3D printed products[J]. Food Hydrocolloids, 2022, 125:107387.
[26] YANG F L, ZHANG M, BHANDARI B, et al. Investigation on lemon juice gel as food material for 3D printing and optimization of printing parameters[J]. LWT, 2018, 87:67-76.
[27] LIU Z P, CHEN H, ZHENG B, et al. Understanding the structure and rheological properties of potato starch induced by hot-extrusion 3D printing[J]. Food Hydrocolloids, 2020, 105:105812.
[28] ZHENG L Y, LIU J B, LIU R, et al. 3D printing performance of gels from wheat starch, flour and whole meal[J]. Food Chemistry, 2021, 356:129546.
[29] LEE J H, WON D J, KIM H W, et al. Effect of particle size on 3D printing performance of the food-ink system with cellular food materials[J]. Journal of Food Engineering, 2019, 256:1-8.
[30] ZHENG L Y, YU Y L, TONG Z B, et al. The characteristics of starch gels molded by 3D printing[J]. Journal of Food Processing and Preservation, 2019, 43(7): e13993.
[31] ZHANG Z J, ZHENG B, TANG Y K, et al. Starch concentration is an important factor for controlling its digestibility during hot-extrusion 3D printing[J]. Food Chemistry, 2022, 379:132180.
[32] AHMADZADEH S, UBEYITOGULLARI A. Fabrication of porous spherical beads from corn starch by using a 3D food printing system[J]. Foods, 2022, 11(7):913.
[33] CHEN H, XIE F W, CHEN L, et al. Effect of rheological properties of potato, rice and corn starches on their hot-extrusion 3D printing behaviors[J]. Journal of Food Engineering, 2019, 244:150-158.
[34] AGUNBIADE A O, SONG L J, AGUNBIADE O J, et al. Potentials of 3D extrusion-based printing in resolving food processing challenges: A perspective review[J]. Journal of Food Process Engineering, 2022, 45(4): e13996.
[35] NIJDAM J J, AGARWAL D, SCHON B S. An experimental assessment of filament-extrusion models used in slicer software for 3D food-printing applications[J]. Journal of Food Engineering, 2022, 317:110711.
[36] WANG L, ZHANG M, BHANDARI B, et al. Investigation on fish surimi gel as promising food material for 3D printing[J]. Journal of Food Engineering, 2018, 220:101-108.
[37] KRISHNARAJ P, ANUKIRUTHIKA T, CHOUDHARY P, et al. 3D extrusion printing and post-processing of fibre-rich snack from indigenous composite flour[J]. Food and Bioprocess Technology, 2019, 12(10):1776-1786.
[38] PAGGI R A, SALMORIA G V, GHIZONI G B, et al. Structure and mechanical properties of 3D-printed cellulose tablets by fused deposition modeling[J]. The International Journal of Advanced Manufacturing Technology, 2019, 100(9):2767-2774.
[39] THEAGARAJAN R, MOSES J A, ANANDHARAMAKRISHNAN C. 3D extrusion printability of rice starch and optimization of process variables[J]. Food and Bioprocess Technology, 2020, 13(6):1048-1062.
[40] OYINLOYE T, YOON W. Application of computational fluid dynamics (CFD) in the deposition process and printability assessment of 3D printing using rice paste[J]. Processes, 2021, 10(1):68.
[41] PAOLILLO M, DEROSSI A, VAN BOMMEL K, et al. Rheological properties, dispensing force and printing fidelity of starchy-gels modulated by concentration, temperature and resting time[J]. Food Hydrocolloids, 2021, 117:106703.
[42] ZENG X X, CHEN H, CHEN L, et al. Insights into the relationship between structure and rheological properties of starch gels in hot-extrusion 3D printing[J]. Food Chemistry, 2021, 342:128362.
[43] MOO-HUCHIN V M, CABRERA-SIERRA M J, ESTRADA-LEÓN R J, et al. Determination of some physicochemical and rheological characteristics of starch obtained from Brosimum alicastrum swartz seeds[J]. Food Hydrocolloids, 2015, 45:48-54.
[44] ASHOGBON A O. Dual modification of various starches: Synthesis, properties and applications[J]. Food Chemistry, 2021, 342:128325.
[45] MANIGLIA B C, PATARO G, FERRARI G, et al. Pulsed electric fields (PEF) treatment to enhance starch 3D printing application: Effect on structure, properties, and functionality of wheat and cassava starches[J]. Innovative Food Science & Emerging Technologies, 2021, 68:102602.
[46] LIU Y T, TANG T T, DUAN S Q, et al. Applicability of rice doughs as promising food materials in extrusion-based 3D printing[J]. Food and Bioprocess Technology, 2020, 13(3):548-563.
[47] QIU Z P, ZHENG B, XU J C, et al. 3D-printing of oxidized starch-based hydrogels with superior hydration properties[J]. Carbohydrate Polymers, 2022, 292:119686.
[48] PARK H R, KANG J, RHO S J, et al. Structural and physicochemical properties of enzymatically modified rice starch as influenced by the degree of enzyme treatment[J]. Journal of Carbohydrate Chemistry, 2020, 39(5-6):250-266.
[49] RONG L Y, SHEN M Y, WEN H L, et al. Effects of xanthan, guar and Mesona chinensis Benth gums on the pasting, rheological, texture properties and microstructure of pea starch gels[J]. Food Hydrocolloids, 2022, 125:107391.
[50] CHEN Y Y, ZHANG M, SUN Y N, et al. Improving 3D/4D printing characteristics of natural food gels by novel additives: A review[J]. Food Hydrocolloids, 2022, 123:107160.
[51] FENG C Y, ZHANG M, BHANDARI B. Materials properties of printable edible inks and printing parameters optimization during 3D printing: A review[J]. Critical Reviews in Food Science and Nutrition, 2019, 59(19):3074-3081.
[52] MANIGLIA B C, LIMA D C, MATTA M D Jr, et al. Preparation of cassava starch hydrogels for application in 3D printing using dry heating treatment (DHT): A prospective study on the effects of DHT and gelatinization conditions[J]. Food Research International, 2020, 128:108803.
[53] YANG F, ZHANG M, LIU Y P. Effect of post-treatment microwave vacuum drying on the quality of 3D-printed mango juice gel[J]. Drying Technology, 2019, 37(14): 1757-1765.
[54] GUO C F, ZHANG M, DEVAHASTIN S. Improvement of 3D printability of buckwheat starch-pectin system via synergistic Ca2+-microwave pretreatment[J]. Food Hydrocolloids, 2021, 113: 106483.
[55]MANIGLIA B C, LIMA D C, JUNIOR M D M, et al. Hydrogels based on ozonated cassava starch: Effect of ozone processing and gelatinization conditions on enhancing 3D-printing applications[J]. International Journal of Biological Macromolecules, 2019, 138: 1087-1097.
[56] XIAO Y H, LIU S C, SHEN M Y, et al. Effect of different Mesona chinensis polysaccharides on pasting, gelation, structural properties and in vitro digestibility of tapioca starch-Mesona chinensis polysaccharides gels[J]. Food Hydrocolloids, 2020, 99: 105327.
[57] CUI Y, LI C Y, GUO Y, et al. Rheological & 3D printing properties of potato starch composite gels[J]. Journal of Food Engineering, 2022, 313: 110756.
[58] ZENG X X, LI T J, ZHU J C, et al. Printability improvement of rice starch gel via catechin and procyanidin in hot extrusion 3D printing[J]. Food Hydrocolloids, 2021, 121:106997.
