食品与发酵工业 >

2021 , Vol. 47 >Issue 15: 248 - 254

DOI: https://doi.org/10.13995/j.cnki.11-1802/ts.025430

生产与科研应用

仿生设计方法在糖化搅拌桨设计中的应用

  • 张志丰 ,
  • 张峻霞 ,
  • 张琰
展开
  • 1(天津科技大学 机械工程学院,天津,300222)
    2(天津市轻工与食品工程机械装备集成设计与在线监控重点实验室,天津,300222)
博士研究生(张峻霞教授为通讯作者,E-mail:zjx@tust.edu.cn)

收稿日期: 2020-08-20

  修回日期: 2021-01-28

  网络出版日期: 2021-08-23

基金资助

国家自然科学基金青年基金项目(51405341);天津市自然科学基金项目(15JCYBJC19300)

收起

Application of bionic method in the design of stirring paddle in mash tun

  • ZHANG Zhifeng ,
  • ZHANG Junxia ,
  • ZHANG Yan
Expand
  • 1(College of Mechanical Engineering,Tianjin University of Science and Technology,Tianjin 300222,China)
    2(Tianjin Key Laboratory of Integrated Design and On-line Monitoring for Light Industry & Food Machinery and Equipment,Tianjin 300222,China)

Received date: 2020-08-20

  Revised date: 2021-01-28

  Online published: 2021-08-23

Fold

摘要

为提高啤酒糖化锅桨叶的搅拌效率,基于仿生设计方法对桨叶曲面进行优化设计。通过对搅拌过程及糖化工艺的分析,确定搅拌桨叶的设计目标,即实现低剪切力、低功率、高效均质和高效传热。创新性地选择蝼蛄挖掘足爪趾为仿生生物原型,对爪趾独特的挖扩式掘进原理进行分析,确定对介质产生较小应力同时介质的应变较大的生物元素,应用于仿生糖化锅搅拌桨叶的设计方案,通过数值模拟对设计方案进行验证。研究表明,仿生桨叶对流体产生的剪切应力较原型桨叶降低4.774%;流体流速最大值增加4.733%,功率降低12.385%,流场矢量方向得到优化,符合理想的流体特征,提高了传热效率。该文对糖化锅搅拌桨叶的仿生设计,为啤酒酿造设备部件的优化提供了参考。

关键词： 搅拌桨; 糖化锅; 仿生设计; 数值模拟; 固-液两相流

本文引用格式

张志丰 , 张峻霞 , 张琰 . 仿生设计方法在糖化搅拌桨设计中的应用[J]. 食品与发酵工业, 2021 , 47(15) : 248 -254 . DOI: 10.13995/j.cnki.11-1802/ts.025430

Abstract

In recent years, China has relaxed the restrictions on beer brewing industry from the aspect of policy norms, and the development of beer industry has ushered in a new opportunity. In order to improve the stirring efficiency of the paddle of mash tun. The optimization design of the paddle surface based on the bionic design method was studied. The design objective of stirring paddle was determined through the analysis of stirring process and mash process requirements in order to achieve low shear force, low power, high-efficiency homogenization and high-efficiency heat transfer. The teeth of mole cricket’s digging claw were innovatively selected as the bionic prototype. And the unique digging and expanding tunneling principle of claw teeth was analyzed. The biological elements with low stress and high strain on the medium were also determined. The design scheme was applied to the stirring paddle of bionic mash tun and verified by numerical simulation. The results show that the shear stress of the bionic paddle on the fluid was 4.774% lower than that of the prototype paddle. And the maximum flow velocity of the fluid was increased by 4.733%. However, the power was reduced by 12.385%. The flow field vector direction was optimized, which accords with the ideal fluid characteristics and the heat transfer efficiency was improved. The study on the bionic design of the stirring paddle in mash tun provides a reference for the optimization design of the key components of beer brewing equipment.

Key words： stirring paddle; mash tun; bionic design; numerical simulation; solid-liquid two-phase flow

参考文献

[1] 杨锋苓,张翠勋,苏腾龙.柔性Rushton搅拌桨的功耗与流场特性研究[J].化工学报,2020,71(2):614-625.
YANG F L,ZHANG C X,SU T L.Power and flow characteristics of flexible-blade Rushton impeller[J].CIESC Journal,2020,71(2):614-625.
[2] EBRAHIMI M,YARAGHI A,EIN-MOZAFFARI F,et al.The effect of impeller configurations on particle mixing in an agitated paddle mixer[J].Powder Technology,2018,332:158-170.
[3] 武启.开启涡轮式桨叶预混机搅拌功率研究[D].武汉:华中科技大学,2016.
WU Q.Research on stirring power for pre-mixer with open turbine blade[D].Wuhan:Huazhong University of Science and Technology,2016.
[4] GIKANGA B,MAA Y F.A review on mixing-induced protein particle formation:The puzzle of bottom-mounted mixers[J].Journal of Pharmaceutical Sciences,2020,109(8):2 363-2 374.
[5] 杨静静,钟俊辉,王金晶,等.大数据时代下的啤酒产品多元创新[J].食品与发酵工业,2018,44(9):282-287.
YANG J J,ZHONG J H,WANG J J,et al.Multivariate innovation of beer product in the big data era[J].Food and Fermentation Industries,2018,44(9):282-287.
[6] DU PLESSIS A,BROECKHOVEN C,YADROITSAVA I,et al.Beautiful and functional:A review of biomimetic design in additive manufacturing[J].Additive Manufacturing,2019,27:408-427.
[7] HAYASHI Y,YOSHIMURA J,ROFF D A,et al.Four types of vibration behaviors in a mole cricket[J].PLoS One,2018,13(10).DOI:10.1371/journal.pone.0204628.
[8] BAILEY D L,HELD D W,KALRA A,et al.Biopores from mole crickets(Scapteriscus spp.) increase soil hydraulic conductivity and infiltration rates[J].Applied Soil Ecology,2015,94:7-14.
[9] 马海乐.食品工程仿生学及其研究框架[J].中国食品学报,2020,20(6):324-329.
MA H L.Establishment of food engineering bionics and its disciplinary framework[J].Journal of Chinese Institute of Food Science and Technology,2020,20(6):324-329.
[10] PANTALEEV S,YORDANOVA S,JANDA A,et al.An experimentally validated DEM study of powder mixing in a paddle blade mixer[J].Powder Technology,2017,311:287-302.
[11] 樊梨明,李庆生.双层桨搅拌槽内流动特性的CFD研究[J].食品与机械,2016,32(1):84-86.
FAN L M,LI Q S.Study on flow characteristics in stirred vessel with double impellers with CFD[J].Food & Machinery,2016,32(1):84-86.
[12] 赵静. 搅拌槽内流体力学性能的实验研究与数值模拟[D].北京:北京化工大学,2011.
ZHAO J.Experimental investigation and numerical simulation of fluid dynamics in stirred tanks[D].Beijing:Beijing University of Chemical Technology,2011.
[13] 吴学凤,姜绍通,张旻,等.机械搅拌生物反应器的CFD模拟及其在发酵生产乳酸中的应用[J].食品科学,2010,31(7):186-189.
WU X F,JIANG S T,ZHANG M,et al.CFD simulation of a mechanically stirred bioreactor and its application in lactic acid production[J].Food Science,2010,31(7):186-189.
[14] 刘瑞赛,安家彦,董文勇,等.利用计算流体力学技术分析啤酒发酵罐构型对温度和流动的影响[J].食品与发酵工业,2016,42(9):52-57.
LIU R S,AN J Y,DONG W Y,et al.Analysis of temperature and convection flow in cylindroconical fermenters with different geometries by computational fluid dynamics[J].Food and Fermentation Industries,2016,42(9):52-57.
[15] YARAGHI A,EBRAHIMI M,EIN-MOZAFFARI F,et al.Mixing assessment of non-cohesive particles in a paddle mixer through experiments and discrete element method (DEM)[J].Advanced Powder Technology,2018,29(11):2 693-2 706.
[16] 张青,张鲁,邹德智,等.大豆油氢化反应釜数值模拟及工艺优化[J].食品科学,2017,38(6):253-260.
ZHANG Q,ZHANG L,ZOU D Z,et al.Numerical simulation of reaction kettle and optimization of reaction conditions for soybean oil hydrogenation[J].Food Science,2017,38(6):253-260.
[17] 林兴华,胡锡文,刘海洋,等.糖化锅的搅拌与传热研究(2):糖化锅的搅拌与传热设计[J].啤酒科技,2005(11):20-23.
LIN X H,HU X W,LIU H Y,et al.Study on stirring and heat transfer of smelting piles (2)—Stirring and heat transfer design of smelting piles[J].Beer Science and Technology,2005(11):20-23.
[18] 胡锡文. 糖化设备搅拌性能的实验研究与数值模拟[D].杭州:浙江大学,2005.
HU X W.Experimental study and numerical simulation of stirring performance of saccharification equipment[D].Hangzhou:Zhejiang University,2005.
[19] 林兴华,胡锡文,刘海洋.糖化锅的搅拌与传热研究(1):糖化锅的搅拌实验研究[J].啤酒科技,2005(10):32-36;40.
LIN X H,HU X W,LIU H Y.Study on stirring and heat transfer in smelting pans (1)—Experimental study on stirring in smelting pans[J].Beer Science and Technology,2005(10):32-36;40.
[20] ZHANG Y,CAO J F,WANG Q,et al.Motion characteristics of the appendages of mole crickets during burrowing[J].Journal of Bionic Engineering,2019,16(2):319-327.
[21] ZHANG Z F,ZHANG Y,ZHANG J X,et al.Structure,mechanics and material properties of claw cuticle from mole cricket Gryllotalpaorientalis[J].PLoS One,2019,14(9).DOI:10.1371/journal.pone.0222116.
[22] LEWIS B A.Manual for LS-DYNA soil material model 147(FHWA-HRT-04-095)[R].Department of Transportation:Federal Highway Adminstration,U.S.A.,2004.
[23] 蒋建东,高洁,赵颖娣,等.基于ALE有限元仿真的土壤切削振动减阻[J].农业工程学报,2012,28(S1):33-38.
JIANG J D,GAO J,ZHAO Y D,et al.Numerical simulation on resistance reduction of soil vibratory tillage using ALE equation[J].Transactions of the Chinese Society of Agricultural Engineering,2012,28(S1):33-38.
[24] 丁峻宏,金先龙,郭毅之,等.土壤切削大变形的三维数值仿真[J].农业机械学报,2007,38(4):118-121.
DING J H,JIN X L,GUO Y Z,et al.Study on 3-D numerical simulation for soil cutting with large deformation[J].Transactions of the Chinese Society for Agricultural Machinery,2007,38(4):118-121.
Options
文章导航

/

〈 〉

技术支持：北京玛格泰克科技发展有限公司