食品与发酵工业

麦麸加碱挤压改性及对其主要成分的影响

  • 李向阳 ,
  • 刘潇 ,
  • 董海洲 ,
  • 张明 ,
  • 刁恩杰 ,
  • 王莉
展开

网络出版日期: 2010-03-25

Alkali Modification Extrusion and Its Effects on Wheat Components

  • Li Xiangyang ,
  • Liu Xiao ,
  • Dong Haizhou ,
  • Zhang Ming ,
  • Diao Enjie ,
  • Wang Li
Expand

Online published: 2010-03-25

摘要

以麦麸为原料,碱为催化剂,对加碱挤压膨化改性麦麸膳食纤维工艺条件及对其主要成分影响进行研究。结果表明:影响加碱挤压改性麦麸膳食纤维的主要因素是碱液浓度,其次是膨化温度和物料含水量,转速影响最小;最佳工艺条件是:NaOH为催化剂、物料粒度60目、物料含水量32.5%、碱液浓度(以物料含水量计算)4.5%、膨化温度115℃和转速250r/min;在该工艺条件下加碱挤压膨化与未加碱挤压膨化相比,脂肪、蛋白质含量几乎没有发生变化,淀粉、IDF、植酸含量分别下降18.34%、39.76%、72.87%,SDF提高96.72%。

关键词: 麦麸; 加碱; 挤压膨化; 改性

本文引用格式

李向阳 , 刘潇 , 董海洲 , 张明 , 刁恩杰 , 王莉 . 麦麸加碱挤压改性及对其主要成分的影响[J]. 食品与发酵工业, 2010 , 36(03) : 89 -92,97 . DOI: 10.13995/j.cnki.11-1802/ts.2010.03.030

Abstract

The wheat bran was used as raw material and alkali was the catalyst in the study. The processing conditions of extrusion modified wheat bran and it's impacts on wheat bran main components was studied. The results indicated that the main influence factor on extrusion modified wheat bran was the alkali concentration,then the extrusion temperature and material moisture,the least one was the rotate speed. The optimum processing conditions were:sodium hydroxide as the catalyst,particle size 60 mesh,32.5% moisture,4.5% (calculated by moisture content of materials) of alkali concentration,temperature 115 ℃ and rotating speed 250r/min. Compared with no alkali one,the contents of fats and proteins were almost no change. However,the starch,IDF and phytic acid content decreased by 18.34%,39.76%,72.87% respectively. The SDF increased by 96.72%.
文章导航

/